감지 규칙을 정교하게,
오탐은 최소로.
Precise rules,
fewer false alarms.
FixLimit · Sigma · Change · Switch 등 6가지 모니터 타입에 EWMA/CUSUM 드리프트, Mann-Kendall 장기추세, 고착/급변 품질 애드온을 조합해 태그별 감지 규칙을 정교하게 설계. IQR 기반 일평균 전처리로 노이즈를 제거하고, SMS 발송 정책·수신자 매트릭스로 정확한 담당자에게만 도달합니다. Combine six monitor types (FixLimit, Sigma, Change, Switch, and more) with EWMA/CUSUM drift, Mann-Kendall trend, and stuck/spike quality add-ons to design tag-level detection rules precisely. IQR-based daily pre-processing removes noise; SMS delivery policies with a recipient matrix route to exactly the right person.
6가지 모니터 타입,
4가지 애드온.
Six monitor types,
four add-ons.
공정 태그마다 다르게 뛰는 이상을 잡기 위한 감지 규칙 8가지. 통계, 추세, 드리프트, 품질, 전처리, 태그 관리, AI 연동, 발송 정책까지. Eight rule capabilities for the many faces of process anomalies — statistics, trend, drift, quality, pre-processing, tag management, AI linkage, and delivery.
모니터 타입 6종Six monitor types
FixLimit(상/하한 + OR/AND, 비교연산자), Sigma(σ 배수 + 이동평균), Average(평균 배수), Change(값 변경 + Include/Exclude 필터), Switch(시작/종료 + 히스테리시스), Option(애드온 전용).FixLimit (upper/lower + OR/AND, comparison ops), Sigma (σ multiplier + moving avg), Average (avg multiplier), Change (value delta + include/exclude filter), Switch (start/end + hysteresis), Option (add-on only).
- 비교 연산자 · AND/OR 조합Comparison ops, AND/OR combos
- Switch 종료조건 미사용 옵션Switch end-condition opt-out
장기추세 5가지Five trend algorithms
SignCount · RegSlope · SegMean · MACross(단·장기 MA창) · Mann-Kendall(+Sen 기울기, |Z| ≥ 1.96 고정). 상승·하강·양방향 감시 기간(일) 태그별 설정.SignCount, RegSlope, SegMean, MACross (short/long MA windows), Mann-Kendall (with Sen slope, |Z| ≥ 1.96). Per-tag direction and window (days).
- 방향 · 감시 기간 개별 설정Direction and window per rule
- 모니터 타입과 독립 조합 가능Combines with any monitor type
드리프트 감지 (EWMA · CUSUM)Drift detection (EWMA · CUSUM)
EWMA는 λ(가중치)로 최근값에 민감도를 조절하고, CUSUM은 K(허용편차)·H(임계 누적)로 눈에 안 띄는 편류를 놓치지 않고 잡습니다.EWMA (λ weighting) tunes recency sensitivity; CUSUM (K allowance, H threshold) catches the subtle drift the eye misses.
- 파라미터 태그별 개별 저장Per-tag parameters saved
- 통계 감지와 동시 적용Runs alongside statistical rules
품질 감지 (고착 · 급변)Quality checks (stuck & spike)
STUCK(무변동 분 + 허용편차)과 SPIKE(σ 배수 + 슬라이딩 윈도우)를 각각 독립 활성화. 센서 고장 · 스파이크 노이즈를 동시에 잡습니다.STUCK (no-change minutes + tolerance) and SPIKE (σ multiplier + sliding window) as independent toggles. Catches stuck sensors and spike noise together.
- 허용편차 · 윈도우 세밀 조정Fine-tunable tolerance/window
- 센서 상태 검증 워크플로우Sensor-health verification loop
일평균 전처리 (IQR + 필터)Daily pre-processing (IQR + filters)
전처리 필터 1/2 (연산자 + 값) 로 알려진 이상치를 사전 제거, IQR 전처리 (IQR Weight, 기본 1.5) 로 통계적 이상 자동 제거. 노이즈 없는 신호만 감지 엔진에 투입.Pre-filter 1/2 (operator + value) filter known outliers; IQR pre-filter (IQR Weight, default 1.5) removes statistical anomalies. Only clean signal reaches the engine.
- 2단 값 필터 + IQR 통계 필터Two value filters + IQR filter
- 일평균 기반 안정 감지Daily-avg stability baseline
감시 태그 · 일괄 검증Watch tags & batch verify
태그 다중 등록 + 팝업 검색(다중 태그 검색 팝업). 선택된 룰의 태그 Confidence를 RTDB로 일괄 확인(일괄 태그 검증 API)하고 사용 여부 자동 갱신.Multi-add tags with popup search; bulk-verify tag Confidence against RTDB (Batch tag verify API) and auto-toggle Enabled.
- 불량 태그 자동 필터 (불량 태그)Bad-tag auto filter (Bad tag)
- 룰 복제(새로저장) · 태그 편집 토글Rule clone (save-as) & tag-edit toggle
AI 연관 태그 연동AI-linked tags
감지 태그에 Rapid Insight-AI 학습용 연관 태그(AI 연관 태그)를 별도 카드로 등록. 감시 태그 복사 · RAI 설정 링크로 감지 → AI 학습 파이프라인을 직결.Register AI-linked tags (AI-linked tag) that feed Rapid Insight-AI training in a dedicated card. Copy from watch tags and jump straight to RAI settings.
- 감시 태그 복사 · RAI 설정 직결Copy watch tags, jump to RAI config
- BASIC / EVENT 태그 유형 분리BASIC / EVENT tag types
SMS 발송 정책 · 수신자SMS policy & recipients
지연(발송 지연), 수신시간대(수신 시간대), 반복 주기(반복 주기), 다음알람 쿨다운(알람 쿨다운), 종료 통지(종료 통지). 수신자는 개별 사용자(SSO) + 수신자 그룹 다중 등록, 행별 사용 체크박스.Delay (Send delay), receive window (Receive window), repeat cycle (Repeat cycle), cooldown (Cooldown), and end-notification (End-notification). Recipients: individual SSO users and receiver groups with per-row enable.
- 발송 · 종료 메시지 각 120자Send & end messages, 120 chars each
- 시간대 외 자동 억제 · 반복 억제Out-of-window & repeat suppression
놓치지 않는 검출,
흔들리지 않는 통보.
Detection you don't miss,
notification that doesn't drop.
감지 규칙 CRUD · 배치 실행 Rule CRUD & batch execution
플랜트 스코프별 감지 규칙(모니터 타입 · 애드온 · 전처리 · 감시 태그 · 발송 정책 · 수신자)을 등록 · 수정 · 복제 · 삭제. 저장된 규칙은 감지 배치 프로세스 배치 프로세스가 실행하며 마지막 실행 시각 으로 마지막 실행 시각을 표시합니다. 발생 이력 · SMS 발송 이력 · Ack · 분석은 별도 페이지에서 확인합니다. Register, edit, clone, and delete detection rules (monitor type · add-ons · pre-processing · watch tags · delivery policy · recipients) per plant scope. Rules are executed by the Detection batch batch process; Last-run time shows the last execution. Occurrence history, SMS logs, ack, and analysis live on separate pages.